How to disassemble the keyboard axis: Hot topics on the Internet in the past 10 days and disassembly guide
Recently, mechanical keyboard DIY and modification have become a hot topic among technology enthusiasts. This article will combine the hot content on the Internet in the past 10 days to provide you with a detailed guide to removing the keyboard shaft, and attach relevant data for reference.
1. Hot topics on mechanical keyboards across the Internet (last 10 days)
| Ranking | hot topics | Discussion popularity | Main platform |
|---|---|---|---|
| 1 | Mechanical keyboard shaft replacement tutorial | 85,000+ | Station B, Zhihu |
| 2 | Cherry shaft vs domestic shaft comparison | 62,000+ | Tieba, Weibo |
| 3 | Recommended keyboard disassembly tools | 47,000+ | Douyin, Xiaohongshu |
| 4 | Hot-swappable keyboard retrofit | 35,000+ | YouTube, B station |
2. List of necessary tools for keyboard shaft removal
| Tool name | Purpose | Recommended brands | reference price |
|---|---|---|---|
| Shaft puller | Take out the shaft body | Keychron | 15-30 yuan |
| Screwdriver set | Remove the keyboard shell | Wera | 50-150 yuan |
| Solder absorber | Remove solder | Hakko | 30-80 yuan |
| soldering iron | Soldering/Desoldering | TS100 | 200-300 yuan |
3. Detailed step-by-step guide for shaft disassembly
1.Preparation: Make sure your keyboard is powered off and have all your tools and work surface ready.
2.Remove the casing: Use a screwdriver to remove all the screws at the bottom of the keyboard, and be careful to save the screws.
3.Separate PCB board: Carefully separate the keyboard shell to expose the internal PCB board and shaft body.
4.Shaft removal operation:Select different methods according to keyboard type:
| keyboard type | How to remove the shaft | Difficulty level |
|---|---|---|
| hot-swappable keyboard | Directly use the shaft puller to pull out | ★☆☆☆☆ |
| welding keyboard | Requires use of soldering iron and solder extractor | ★★★☆☆ |
| snap-on keyboard | Need to release the buckle first and then pull out the shaft | ★★☆☆☆ |
5.Things to note:
- When welding the keyboard to remove the shaft, it is recommended to control the soldering iron temperature at 300-350℃
- Maintain vertical force when pulling out the shaft to avoid damaging the shaft seat
- Record the shaft direction to facilitate reinstallation
4. Recent popular shaft replacement recommendations
| Shaft type | Features | Applicable scenarios | heat index |
|---|---|---|---|
| TTC gold powder shaft | Light pressure linear axis | office typing | ★★★★★ |
| Jiadalong G Yellow Pro | Smooth linear axis | game | ★★★★☆ |
| Kaihua Box white | crisp paragraph axis | writing work | ★★★☆☆ |
5. Frequently Asked Questions
Q: Will removing the axis damage the keyboard?
A: Correct operation will not cause damage, but novices are advised to practice on unimportant keyboards first.
Q: Can all keyboards be detached?
A: Membrane keyboards cannot disassemble the shaft. Only mechanical keyboards support shaft replacement.
Q: Will the warranty become invalid after removing the axle?
A: Most brands will regard it as man-made damage. It is recommended to confirm the warranty policy before proceeding.
Through the detailed guide in this article, I believe you have mastered the key points of removing the keyboard hinge. Remember to be patient during operation and I wish you smooth modification!
check the details
check the details
en
